Support structures
Scaffolding and accessories for the installation of horizontal beams
Support platforms and accessories
Used in construction works for positioning horizontal beams experiencing heavy loads. Simplicity and ease of installation allows for quick assembly and disassembly of the platform. The whole structure is made of a 1,500 mm wide iron frame. Different design configurations: 1,100 mm, 1,500 mm and 1,800 mm. Robust diagonal joints makes it possible to space the side frames 2 m apart, providing support over a larger area. Top and bottom adjustable supports (handles) allow the height of the structure to be adjusted precisely.
Beam H20
The basis of support systems for horizontally installed beams. Such beams can be installed over large areas while maintaining their nominal load capacity without fear of collapse, deformation or cracking. A layer of water-resistant paint makes it possible to use the beams in adverse weather conditions. Length of beams can vary from 2.5 to 6 metres, depending on customer requirements.
Beam support
Designed for the mounting of support beams. Height: 50-100 cm. The base of support is made of threaded pipes (48 mm).
Adjustment support
Designed to balance the height of constructions to enable mounting on uneven surfaces. Heights range from 50-100 cm. Manufactured from sheet metal (150 x 150 mm), screwed pipe (48 mm) and adjusting nuts.
Original Azerbaijani brand since 1997
COMPANY
USEFUL
CONTACTS
Boyukshor 15 A, AZ1029
Baku, Azərbaijan
+994 (12) 958
